猫咪社区APP

Education

• Ph.D. Mechanical Engineering, University of Delaware, US
• B.S. Naval Architecture Engineering, National Taiwan University, Taipei, Taiwan

Research

• Novel 3D printing of Carbon Fiber Reinforced Polymer (CFRP) Composite Parts.
• Nanofibers Z-Threaded CFRP Composites (i.e., ZT-CFRP).
• New multi-functional lightweight CFRP.
• SHM and real-time cure monitoring and control of CFRP.
• Artificial Intelligence Enabled Composite Material Manufacturing Integration. Streamlined Design, Planning, Sensing, Control, Database Feedback, Machine Decision to Mitigate Predicted Risks, and Artificial Intelligence-Self-Learning.
• Systems for Composites Manufacturing
• Liquid Composite Molding Processes such as RTM, VARTM, SCRIMP, and the variations
• Out-Of-Autoclave Vacuum Bag Only (OOA-VBO) process
• Void and Defect Characterization and Modeling for Polymer Matrix Composites
• Residual Stress and Dimensional Stability of Polymer Matrix Composites
• Nano-Composites and Multiscale Micro-/Nano- Fibers Reinforced
• Composites Manufacturing and Characterization
• Micro/Nano-fluids and Suspensions in Porous Media
• Functionally Graded Materials
• Adhesive Joint for Polymer Composite Materials
• Rheology, Viscous Flow, ER/MR fluids
• Transport Phenomena in Porous Media
• Numerical Methods
• Sustainable Energy Technologies (energy storage and harvest)

Publications

• Manufacturing techniques for polymer matrix composites (PMCs), Ed. Suresh G. Advani and Kuang-Ting Hsiao, Woodhead Publishing Limited, Cambridge, UK. 2012. (ISBN: 978-0-85709-067-6 (print); ISBN: 978-0-85709625-8 (online))
• Islam MR, Uddin MN, Taylor W, Warren R, Hsiao K.-T. 鈥淓nhancing the Longitudinal Compressive Strength of Freeform 3D-Printed Continuous Carbon Fiber-Reinforced Polymer Composite Laminate Using Magnetic Compaction Force and Nanofiber Z-Threads鈥�, Materials. 2024; 17(7):1589. https://doi.org/10.3390/ma17071589
• Sebastian Kirmse, Bikash Ranabhat, Kuang-Ting Hsiao, 鈥淓xperimental and analytical investigation on the interlaminar shear strength of carbon fiber composites reinforced with carbon nanofiber z-threads鈥�, Materials Today Communications, Volume 25, December 2020, 101512 (https://doi.org/10.1016/j.mtcomm.2020.101512)
• Bikash Ranabhat, Joseph Clements, Jacob Gatlin, Kuang-Ting Hsiao, Mark Yampolskiy, 鈥淥ptimal Sabotage Attack on Composite Material Parts鈥�, International Journal of Critical Infrastructure Protection, Volume 26, September 2019, 100301. (https://doi.org/10.1016/j.ijcip.2019.05.004).
• M. Scruggs, S. Kirmse, and K.-T. Hsiao, 鈥淓nhancement of Through-Thickness Thermal Transport in Unidirectional Carbon Fiber Reinforced Plastic Laminates due to the Synergetic Role of Carbon Nanofiber Z-Threads.鈥� J. Nanomaterials, Volume 2019, Article ID 8928917, 13 pages, (https://doi.org/10.1155/2019/8928917).
• K.-T. Hsiao, A.M. Scruggs, J.S. Brewer Jr, G.J.S. Hickman, E.E. McDonald, K. Henderson, 鈥淓ffect of carbon nanofiber z-threads on mode-I delamination toughness of carbon fiber reinforced plastic laminates.鈥� Composites Part A: Applied Science and Manufacturing, Volume 91, December 2016, 324-335. (http://dx.doi.org/10.1016/j.compositesa.2016.10.022)
• Rahman, M. M., Hosur, M., Hsiao, K.-T., Wallace, L., Jeelani, S. 鈥淟ow velocity impact properties of carbon nanofibers integrated carbon fiber/epoxy hybrid composites manufactured by OOA鈥揤BO process. Composite Structures,鈥� 120, 32-40, 2014. (http://dx.doi.org/10.1016/j.compstruct.2014.09.053)
• Kuang-Ting Hsiao, 鈥淓mbedded single carbon fibre to sense the thermomechanical behavior of an epoxy during the cure process,鈥� Composites: Part A: Applied Science and Manufacturing 46, 117鈥�121, 2013.
• Vishwanath R. Kedari, Basil Farah, and Kuang-Ting Hsiao, 鈥淓ffects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester/E glass fiber composites manufactured with VARTM process,鈥� J. Composite Materials 45(26) 2727鈥�2742, 2011.
• Ramin Sadeghian, Sudhir Gangireddy, Bob Minaie, Kuang-Ting Hsiao, 鈥淢anufacturing carbon nanofibers toughened polyester/glass fiber composites using vacuum assisted resin transfer molding for enhancing the mode-I delamination resistance,鈥� Composites Part A: Applied Science and Manufacturing, 37(10), 1787-1795, 2006.
• K.T. Hsiao, R. Little, O. Restrepo, B. Minaie, 鈥淎 Study of Direct Cure Kinetics Characterization During Liquid Composite Molding,鈥� Composites Part A: Applied Science and Manufacturing, 37(6), 925-933, 2006.
• M. Devillard, K.T. Hsiao and S. G. Advani, 鈥淔low sensing and control strategies to address race-tracking disturbances in resin transfer molding 鈥� Part II: automation and validation,鈥� Composites Part A: Applied Science and Manufacturing, 36(11), 1581-1589, 2005.
• K.-T. Hsiao and S. G. Advani, 鈥淔low sensing and control strategies to address racetracking disturbances in resin transfer molding 鈥� Part I: design and algorithm development,鈥� Composites Part A: Applied Science and Manufacturing, 35(10), 1149鈥� 1159, 2004.
• K.-T. Hsiao, J. Alms, S.G. Advani, 鈥淯se of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites,鈥� Nanotechnology, 14, pp. 791-793, 2003.
• K.-T. Hsiao and S. G. Advani, 鈥淎 coupled approach to predict microscopic temperature distribution inside a unit cell of nonisothermal laminar flow in periodic porous media,鈥� J. Porous Media 5(2), 69-85, 2002.
• K.-T. Hsiao and S. G. Advani, 鈥淎 Theory to Describe Heat Transfer during Laminar Incompressible Flow of a Fluid in Periodic Porous Media,鈥� Physics of Fluids, Vol. 11, No. 7, pp. 1738-1748, 1999.
• Google Scholar:

Patents

• Kuang-Ting Hsiao, 鈥淚nsulated fiber sensor apparatus and method鈥�, US Patent 8451013 B1, 2013 (https://www.google.ch/patents/US8451013)
• Kuang-Ting Hsiao and Gregory Hickman, 鈥淢ethod for manufacturing nano-structurally aligned multi-scale composites鈥�, US Patent 10066065B2, 2018-09-04 (https://patents.google.com/patent/US10066065B2)
• Kuang-Ting Hsiao, 鈥淎pparatus and method for directional alignment of nanofibers in a porous medium鈥�, US Patent 10556390B2, 2020-02-11 (https://patents.google.com/patent/US10556390B2/en)
• Kuang-Ting Hsiao, 鈥淧orous nanocomposite and related method鈥�, US Patent 10947356B2, 2021-03-16 (https://patents.google.com/patent/US10947356B2/en)
• Kuang-Ting Hsiao, 鈥淢ethod and apparatus for 3D printing鈥�, US Patent 11426935B2, 2022-08-30 (https://patents.google.com/patent/US11426935B2/en)
• Kuang-Ting Hsiao, 鈥淢ethod and Apparatus for 3D Printing鈥�, US Patent 11858212B2, 2024-01-02 (https://patents.google.com/patent/US11858212B2/en)
• Google Patents:

Professional Activities

• Elected Fellow of the International Association of Advanced Materials (FIAAM), Class of 2024
• Elected Senior Member of National Academy of Inventors (SMNAI), Class of 2024
• Member, Advancement of Material and Process Engineering (SAMPE)
• Member, American Society of Mechanical Engineering (ASME)
• Awarded Scientist Medal by International Association of Advanced Materials, 2023
• Russell and Robin Lea National Alumni Excellence in Faculty Innovation Award, University of South Alabama (2015)
• Olivia Rambo McGlothren National Alumni Outstanding Scholar Award, University of South Alabama National Alumni Association (2010)
• Excellence in Research Award, 猫咪社区APP College of Engineering (2009)

Courses

• ME-135 Engineering Graphics and Comm.
• EG-284 Dynamics
• ME-228 Mechanical Engineering Analysis I
• ME-228 Computational Engineering (restructured and renamed in 2023)
• ME-328 Mechanical Engineering Analysis II, Mechanical Engineering Analysis (combined)
• ME-328 Numerical Methods (restructured and renamed in 2023)
• ME-314 Machine Component Design    
• ME-432 Advanced Thermodynamic
• ME-520 Adv. Fluid Mechanics
• ME-540 Advanced Heat Transfer
• ME-541 Conduction Heat Transfer
• ME-551 Classical Thermodynamics
• ME-582 Advanced Materials Science
• ME-590 SpTop: Liquid Comp Molding